Lexmark C 750 Quick Reference page 2

10 Squeeze the paper guide lever and slide the guide until it Transparencies and glossy paper
lightly touches the side of the stack.
You can use the multipurpose feeder, tray 1, or any 500-sheet tray
for transparencies or glossy paper. Load transparencies or glossy
paper just as you would normal paper.
1 In your word processor, spreadsheet, browser, or other
application, select
2 Click
application) to view the printer driver settings.
3 Select the tray containing the specialty media from the Form
Source list box.
4 Select your media type (transparencies, glossy paper, and so
on) from the Media Type list box.
5 Click
11 Press Go.
Canceling a print job
Printing on specialty media
To cancel a print job after it has started printing:
1 Press
Envelopes 2 Press
You can print up to 10 envelopes using the multipurpose feeder.
Printing a menu settings page
Make sure you load envelopes print side up (flaps down). See
Loading the multipurpose feeder for detailed instructions.
To verify Paper Size and Paper Type settings, and check installed
options and memory, print a menu settings page:
1 Press
2 Press
The menu settings page prints.
Printing confidential jobs
If you want to print a job that is personal or confidential, and you do
not want anyone else to see it, the printer can hold your job in
memory until you arrive at the printer.
Note: This only works with Lexmark C750 custom printer drivers.
File Print .
These drivers are located on the drivers CD that shipped with
Properties (or Options , Printer , or Setup depending on the
your printer and on the Web at www.lexmark.com.
To a print confidential job:
1 In your word processor, spreadsheet, browser, or other
application, select File
2 Click Properties
application) to view the printer driver settings.
OK , and then send your print job as usual.
3 Click Help and refer to the topic confidential print or print and
hold. Follow the instructions.
Note: If you send a large file to a shared network printer, it
remains in the printer memory until you print it. This
could prevent others from printing. Retrieve your print
Menu until you see Job Menu, and then press Select .
jobs as soon as possible. To check the amount of
Menu until you see Cancel Job, and then press Select . memory in your printer, see
page.
4 Go to the printer and use the operator panel to retrieve your
confidential print job:
a Press
Menu
.
Select
Menu until you see Utilities Menu, and then press Select . b Press Menu
.
Select
Menu until you see Print Menus, and then press Select .
c Enter your four-digit personal identification number (PIN)
using the numbered buttons on the operator panel. As you
enter your PIN, asterisks appear on the display.
d Press Menu
Select . (Print All Jobs sends all jobs with the same user
name and PIN immediately to the printer.)
e Press Menu until you see the job you want to print, and then
press Select .
f Press to send the job to the printer.
Go
After the job prints, the job is deleted from printer memory and the
printer returns to the Ready state.
Common printer messages
Message Actions
2XX Paper Jam • Remove the currently loaded paper
from the specified tray, and then load
Change Tray <x>
the requested paper.
The printer is requesting
a different size or type of • Press
paper than what is and print on the media currently
loaded. loaded in the tray.
• Cancel the current job.
Print .
• Load the multipurpose feeder with the
Load Manual
(or Options , Printer , or Setup depending on the
paper specified on the second line of
The printer is ready for
the display.
paper to be inserted into
the multipurpose feeder.
• Press
manual feed request and print on
paper already installed in one of the
paper trays.
• Cancel the current job.
Printing a menu settings
Move the guide to the proper position or
Check <source>
load the paper correctly.
Paper Guide
The guide in the paper
source is set incorrectly
or the paper is loaded
until you see Confidential Job, and then press
incorrectly.
Waiting • Press
until you see your user name, and then press
buffer.
The printer has received
data to print but is
• Cancel the current job.
waiting for a command
or additional data.
Not Ready Press Go to ready the printer to receive
until you see Print A Job, and then press
jobs.
The printer is not ready
to process data.
• Wait for the message to clear.
Flushing Buffer
The printer is discarding
• Sometimes this message means the
the current print job.
driver data did not match what the
printer was expecting. If the situation
recurs, try printing from another
Lexmark C750 printer driver.
Message Actions
• Press Go to reenter the PIN.
No Jobs Found.
Retry?
• Press Return until the printer returns
The PIN you entered on to the Ready state.
the operator panel does
not match the one you
specified when you sent
Select to clear the message
the print job.
Clear Paper Path Refer to the Lexmark C750 Clearing Jams
reference card for instructions to clear the
Paper is jammed.
paper path.
Replace the image transfer unit and the
ITU/Fuser Maint
fuser.
The image transfer unit
Refer to the Lexmark C750 Publications CD
and fuser require
Select or Go to ignore the
maintenance. for information about ordering and replacing
these maintenance items.
80 Fuser Replace the fuser.
Maintenance
Refer to the Lexmark C750 Publications CD
for information about ordering and replacing
The fuser needs
the fuser.
replacing.
81 ITU Replace the image transfer unit.
Maintenance
Refer to the Lexmark C750 Publications CD
for information about ordering and replacing
The image transfer unit
the image transfer unit.
needs replacing.
82 Oiler Nearly Replace the web oiler.
Go to print the contents of the
Exhausted
Refer to the Lexmark C750 Publications CD
for information about ordering and replacing
or
the web oiler.
82 Oiler
Exhausted
The web oiler on the
fuser needs replacing.
If you need more information
• Refer to the Lexmark C750 Setup Guide or the Lexmark C750
Publications CD for helpful information about using and
maintaining your printer.
• Contact your administrator or Help desk if you have questions
about network printing.