Download Print this page

IronStrike WINSLOW PS40 Quick Start Manual

Hide thumbs Also See for WINSLOW PS40:

Advertisement

QUICK START GUIDE - WINSLOW™ PS40 PELLET STOVE
1
PURCHASING THE CORRECT FUEL FOR THE STOVE
The Winslow pellet stove has been designed to burn wood pellets. We recommend burning
Premium Grade wood pellet fuel manufactured by companies who are members of the Pellet
Fuels Institute (PFI). Although similar in appearance to those made of wood, other pelletized
fuels such as wheat, barley, cherry pits, etc. will adversely affect the performance of the stove
and may compromise safety and void warranty.
RECOMMENDED FUEL
PFI APPROVED
PREMIUM GRADE
LESS THAN 1% ASH CONTENT
LESS THAN 300 PPM CHLORIDES
WARNING
Before you set up or operate your stove, review all safety, installation,
and operation instructions in your "Installation and Operation Manual."
USING THIS GUIDE
This guide contains 5 easy steps to help you learn more about using
your new Winslow™ PS40 pellet stove. Detailed operating and cleaning
instructions are located in the "Installation and Operation Manual."
INCORRECT FUEL
MOISTURE DAMAGE
EXCESSIVE SAWDUST
HIGH CHLORIDE OR
ASH CONTENT
OVERSIZED PELLETS
WHEAT PELLETS
(LONGER THAN 1-1/2")
BARLEY PELLETS
COMMERCIAL GRADE
BARK PELLETS
ECONOMY GRADE
PFI LOGO

Advertisement

loading
Need help?

Need help?

Do you have a question about the WINSLOW PS40 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IronStrike WINSLOW PS40

  • Page 1 QUICK START GUIDE - WINSLOW™ PS40 PELLET STOVE WARNING Before you set up or operate your stove, review all safety, installation, and operation instructions in your “Installation and Operation Manual.” USING THIS GUIDE This guide contains 5 easy steps to help you learn more about using your new Winslow™...
  • Page 2: Manual Operation

    4. If the flame goes out, press the “Start” button to re-ignite the stove Start Igniting Ready Feeding STOPPING THE WINSLOW PS40 PELLET STOVE High Control Fuse Ignitor Fuse Start 1. Turn the control board dial to the “OFF” position...
  • Page 3 DAMPER ADJUSTMENT The Winslow™ PS40 pellet stove is equipped with a damper adjustment which is used to fine tune combustion. Although every unit is test burned and calibrated at the factory, periodic adjustment may be necessary at times to compensate for variables such as fuel, venting, climate, altitude, and maintenance intervals. OPENING THE DAMPER Opening the damper increases the amount of combustion air.
  • Page 4 Severe burns may result. Carefully supervise children in the same room as appliance. • IronStrike™ pellet-burning appliances are designed for use as • supplemental heaters. They are not intended for continuous use as primary heat sources.