IronStrike 32FS Quick Start Manual
Hide thumbs
Also See for 32FS:
- Installation and operation manual (38 pages) ,
- Quick start manual (4 pages)
Advertisement
Quick Links
QUICK START GUIDE - MONTAGE™ PELLET STOVE 32FS
1
PURCHASING THE CORRECT FUEL FOR THE STOVE
The Montage™ pellet stove has been designed to burn wood pellets only. We recommend
burning Premium Grade wood pellet fuel manufactured by companies who are members of
the Pellet Fuels Institute (PFI). Although similar in appearance to those made of wood, other
pelletized fuels such as wheat, barley, or corn will adversely affect the performance of the
stove and may compromise safety.
RECOMMENDED FUEL
•
PFI APPROVED
•
PREMIUM GRADE
•
LESS THAN 1% ASH CONTENT
•
LESS THAN 300 PPM CHLORIDES
WARNING
Before you set up or operate your stove, review all safety, installation,
and operation instructions in your "Installation and Operation Manual."
USING THIS GUIDE
This guide contains 5 easy steps to help you learn more about using
your new Montage pellet stove. Detailed operating and cleaning in-
structions are located in the "Installation and Operation Manual."
INCORRECT FUEL
•
•
MOISTURE DAMAGE
•
EXCESSIVE SAWDUST
•
•
HIGH CHLORIDE OR
•
ASH CONTENT
•
OVERSIZED PELLETS
WHEAT PELLETS
(LONGER THAN 1-1/2")
•
BARLEY PELLETS
COMMERCIAL GRADE
•
BARK PELLETS
ECONOMY GRADE
•
CORN
PFI LOGO
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for IronStrike 32FS
Summary of Contents for IronStrike 32FS
- Page 1 QUICK START GUIDE - MONTAGE™ PELLET STOVE 32FS WARNING Before you set up or operate your stove, review all safety, installation, and operation instructions in your “Installation and Operation Manual.” USING THIS GUIDE This guide contains 5 easy steps to help you learn more about using your new Montage pellet stove.
-
Page 2: Manual Operation
MANUAL OPERATION* STARTING THE MONTAGE™ PELLET STOVE COMBUSTION 1. Fill the hopper with pellets COMBUSTION Hopper lid must 2. Make sure the hopper lid is completely closed be closed during operation. 3. Press the “START” button on the control panel to begin the ignition cycle HEAT START... - Page 3 DAMPER ADJUSTMENT The Montage™ pellet stove is equipped with a damper which is used to fine tune combustion. Although every unit is test burned and calibrated at the factory, periodic adjustment may be necessary at times to compensate for variables such as fuel, venting, altitude, and maintenance intervals. OPENING THE DAMPER Opening the damper increases the amount of combustion air.
- Page 4 Severe burns may result. • Carefully supervise children in the same room as appliance. • IronStrike™ pellet-burning appliances are designed for use as supplemental heater. They are not intended for continuous use as a primary heat source. © 2009 Innovative Hearth Products LLC Visit us at www.IronStrike.us.com...
Need help?
Do you have a question about the 32FS and is the answer not in the manual?
Questions and answers
exactly where is the fuse for the igniter located at?
The fuse for the igniter on the IronStrike Montage 32FS is a 6 Amp - 125V fast-acting fuse, part number 12055908. The exact physical location of the fuse within the stove is not specified in the provided context.
This answer is automatically generated