Installing Device Drivers; Using The Thinkpad Setup Program; Main Menu - Lenovo ThinkPad E450 User Manual

Lenovo thinkpad e450; thinkpad e455; thinkpad e450c laptop
Hide thumbs Also See for ThinkPad E450:
Table of Contents

Advertisement

Installing device drivers

Device driver is the program that operates a particular hardware device of the computer. If a device does
not perform well or you install a new device, you need to install or update the corresponding device driver.
For example, if you use the Windows 7 operating system, to use the USB 3.0 connector, you need to
download and install the USB 3.0 driver.
To download the latest device drivers, do the following:
1. Go to http://www.lenovo.com/ThinkPadDrivers.
2. Select your product name to view all the device drivers for your computer.
3. Select the device drivers you that you need, and follow the instructions on the screen.
Attention: Do not download the device drivers from the Windows Update Web. Always download the device
drivers from:
http://www.lenovo.com/ThinkPadDrivers
If you use the Windows 7 operating system, you also can find the device drivers in the C:\SWTOOLS\DRIVERS
directory on your hard disk drive or solid-state drive. For more information, see "Reinstalling preinstalled
programs and device drivers" on page 105.

Using the ThinkPad Setup program

The ThinkPad Setup program enables you to select various setup configurations for your computer through
configuring the BIOS.
To configure the BIOS of your computer, do the following:
1. Turn on the computer. When the ThinkPad logo is displayed, press F1. The ThinkPad Setup program
starts.
If you are required to enter the supervisor password, enter the correct password. You also can press
Enter to skip the password prompt and start the ThinkPad Setup program. If you do not enter the
password, you cannot change the configurations that are protected by the supervisor password. For
more information, refer to "Using passwords" on page 53.
2. Use the cursor keys to select a tab; or use the cursor keys to locate an item and press Enter to select it.
Then a submenu is displayed.
Note: Some menu items are displayed only if the computer supports the corresponding features.
3. Set the value of an item by doing one of the following:
• Press the F6 key to change to a higher value.
• Press the F5 key to change to a lower value.
Note: Default values are in boldface.
4. To change other configurations, press the Esc key to exit the submenu and return to the parent menu.
5. When you complete the configuration, press the F10 key to save and exit. You also can select the
Restart tab in the ThinkPad Setup menu, and restart your computer with one of the provided options.
Note: You can press the F9 key to restore to the default settings.

Main menu

When you enter the ThinkPad Setup program, you will first see the Main menu as follows:
• UEFI BIOS Version
.
Chapter 6
Advanced configuration
65

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinkpad e455Thinkpad e450c

Table of Contents