Table of Contents
Advertisement
http://www.3jtech.com.tw
http://www.pnpipcameras.com
G2wifi II User's Manual
3.3.5 System
This section allows you to reboot the device, and restore the router to the factory default settings.
Restoring the unit to the factory default settings will erase all settings, including any rules that you
have created.
3.3.5.1 Reboot the Device
This restarts the router. Useful for restarting when you are not near the device.
3.3.5.2 Restore all Settings to the Factory Defaults
This option restores all configuration settings back to the settings that were in effect at the time the
router was shipped from the factory. Any settings that have not been saved will be lost. If you want
to save your router configuration settings, you can do so from the
3.3.5.3 Restore Configuration from File
Use this option to load previously saved router configuration settings.
3.3.5.4 Save Configuration
This option allows you to save the router's configuration to a file on your computer. Be sure to save
the configuration before performing a firmware upgrade.
3.3.6 Firmware
The Firmware Upgrade section can be used to update your router to the latest firmware code to
improve functionality and performance.
To upgrade the firmware, follow these steps:
1.
Click the Browse button to locate the 3Jtech upgrade file on your computer.
2.
Once you have found the file to be used, click the Upload button below to start the firmware
upgrade process. This can take a minute or more.
3.
Wait for the router to reboot. This will take another minute or more.
4.
Confirm updated firmware revision on status page.
Copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Tools -> Admin
60
page.
Advertisement
Table of Contents
