Sensor, Pull Tractor Removal; Sensor, Head Gap Removal; Sensor, Top-Of-Form Removal - Lexmark 24XX-100 Service Manual

24xx

Sensor, Pull Tractor Removal

1. Remove the top cover. Go to
page 4-8.
2. Remove the small screw securing the pull tractor sensor to the
inside of the left frame. Go to
page 4-43.
3. Disconnect the pull tractor sensor from the logic board.

Sensor, Head Gap Removal

1. Remove the top cover. Go to
page 4-8.
2. Remove the screw from the forms thickness lever and remove
the lever.
3. Remove the screw from the head gap sensor and remove the
sensor.
4. Disconnect the head gap sensor cable from the logic board. Go
to "Sensors Removals" on page

Sensor, Top-Of-Form Removal

1. Remove the top cover. Go to
page 4-8.
2. Remove the print unit. Go to
page 4-28.
3. Turn the print unit upside down.
4. Unsnap the Top-Of-Form sensor from the platen. Go to
"Sensors Removals" on page
4-44
Service Manual
"Covers, Top Removal" on
"Sensors Removals" on
"Covers, Top Removal" on
4-43.
"Covers, Top Removal" on
"Print Unit Removal" on
4-43.