Panasonic KX-UT670 Admin Manual page 4

How To Set the Configuration Server
Quick Steps
1. Log into the Web Admin GUI of the phone.
2. Select the "Maintenance" tab at the top right.
KX-UT670
Web Port Close
Status
Version Information
Network Status
VoIP Status
3. Next select "Provisioning Maintenance".
KX-UT670
Web Port Close
Maintenance
Firmware Maintenance
Provisioning Maintenance
Reset to Defaults
Restart
4. You can now specify the provisioning server information. In our example we are using
tftp://10.10.0.1/Config{MAC}.cfg
KX-UT670
Web Port Close
Maintenance
Firmware Maintenance
Provisioning Maintenance
Reset to Defaults
Restart
© Copyright Schmooze Com, 2012
Status Network System VoIP
Version Information
Version Information
Model KX-UT670
OS Version 2.2
Firmware Version 01.072
Status Network System VoIP
Firmware Maintenance
Firmware Maintenance
Enable Firmware Update
Yes
http://10.10.0.1:2004/panasonic/2/UT670.bin
Firmware File URL
Save
Status Network System VoIP
Provisioning Maintenance
Provisioning Maintenance
Enable Provisioning Yes No
http://10.10.0.1:2004/Config{MAC}.cfg
Standard File URL
Product File URL
Master File URL
Cyclic Auto Resync Yes No
10080
Resync Interval minute(s) [1-40320]
Header Value for
check-sync
Resync Event
Save Cancel
Telephone Maintenance
Telephone Maintenance
No
Cancel
Maintenance
Telephone