Displaying Which User/Card Positions Are Occupied - jablotron Oasis User Manual

Note: some detectors (for example the JA-83P wireless
motion detector) are equipped with battery-saving
functionality which prevents repetitive triggering in
short intervals. In this case a pre-programmed time has
to elapse before subsequent triggering is possible (up
to 5 minutes).
In maintenance mode, close the wireless keypad's flip cover if you are not
working with it to save battery energy.
If anything does not work properly during testing, call the installer for help.
In maintenance mode it is possible to replace discharged batteries in the
devices. But it is highly recommended to ask your installer to replace the
battery.
Improper handling can result in damaging the device and loss of warranty.
Recommendations: the system should be annually
inspected by a professional installer who should check
the backup battery voltage and perform functionality
testing.

15. Displaying which user/card positions are occupied

When in maintenance mode, the control panel can display which positions in
the range 01 to 50 are occupied by codes or cards.
To display the positions:
•
Press key 5 (the display indicates "Codes 01: Code" – or the name of
the code holder).
•
Using the arrow keys
scrolled through. The A indicator shows whether a code is
programmed or not, and the B indicator shows whether a card is
programmed or not. (This means if both indicators are lit, the position
is occupied by a code and a card.)
•
To exit this code/card display mode press the # key.
Notes:
Oasis user manual
and all user positions (01 to 50) can be
13 MKE22102