Table of Contents / Introduction
Introduction.........................................................................................................2
Install the batteries .........................................................................................2
MSN TV Buttons ..................................................................................................3
Component Buttons............................................................................................6
Remote Control Codes........................................................................................8
Troubleshooting ................................................................................................13
FCC Information ................................................................................................13
Introduction
This remote control is already programmed to operate the Internet Receiver and
many RCA, ProScan, and GE TVs, VCRs, DVD players, audio receivers, and satellite
receivers. If you want to use the remote to operate other brands of components,
you will need to program it. See page 4 for more instructions on programming the
remote.
Note: The component buttons on your remote (VCR, TV, AUX and
SAT•CABLE) will work only after you have programmed the remote to work
with the component you want to operate. For more information on these and
other remote control buttons, choose Help from your MSN TV home page.
Before using the remote, you need to install the batteries.
Install the batteries
Follow these steps whenever you need to install or change the batteries in your
Internet Receiver's remote control.
1.
Remove the cover from the battery compartment by
pushing it down and sliding it.
2.
Insert batteries in the battery compartment, matching
the + and - end of each battery.
3.
Replace the cover.
Note: When replacing old batteries, you may need
to reprogram the remote control to operate other
components. Avoid pressing any of the remote
control buttons while you're replacing old batteries.
If you press a remote control button while replacing
batteries, you might need to reprogram the remote
control to operate other components.
Table of Contents / Introduction