Understanding The Operator Panel - Lexmark series x5100 User Manual

Use the:
Display
Operator panel
Paper exit tray
Paper guide
Paper support
Power supply
Scanner lock
Scanner support
Scanner unit
Top cover
USB cable

Understanding the operator panel

The operator panel buttons help you scan, copy, fax, and customize
documents. A light indicates whether or not the All-In-One is on, and a
display features the All-In-One status, messages, and menus. You can
press and hold any button to scroll through a list of options on the display.
The table on page 5 shows what each button does.
Note: Button functions (except Stop/Clear) are disabled
When you want to:
Check the status of the All-In-One.
Operate your All-In-One (attached to a computer or
unattached).
For more information, see page 4.
Stack paper as it exits the All-In-One.
Make sure paper feeds correctly into the All-In-One.
Load paper in the All-In-One.
Supply power to the All-In-One.
Lock or unlock the scanner.
Note: Unlock the scanner before use. Lock the
scanner if you are moving your All-In-One.
Keep the scanner unit open to change cartridges,
unlock the scanner, or lock the scanner.
• Change cartridges.
• Unlock the scanner.
• Lock the scanner.
Note: Lift the scanner unit to do these things.
Place an item on or remove an item from the
scanner glass.
Connect your All-In-One to a computer.
during printing, copying, and scanning.
3