Table of Contents
Advertisement
Important Notes
•
First time the fire is lit, the appliance will give off some fumes while the paint cures.
•
The surfaces of this appliance get hot when the fire has been lit. Please ensure that
children, the elderly, and the infirm are made aware of this.
•
Do not use flammable liquids or aerosols to start or rekindle the fire.
•
Never burn woods containing paint, glue, or any other chemicals.
•
Do not use the fire as an incinerator only burn appropriately seasoned wood.
•
Do not overload the appliance with wood.
•
Do not operate stove with the firebox door open.
•
Do not operate the appliance with a cracked glass.
•
Ensure adequate ventilation as described in the installation instructions.
•
This appliance should be maintained and operated at all times in accordance with
these instructions.
•
Occasional local weather conditions may cause downdraught in the flue and cause
the appliance to emit fumes. In these circumstances, the appliance should not be
used. This can generally be resolved by extending the flue or fitting a specialist cowl.
•
In the event of a chimney fire, close the primary air spindle control to suffocate the
fire.
•
After a prolonged period of no use, the chimney and the appliance should be checked
for blockages prior to lighting.
Maintenance
No unauthorised modification of this appliance should be carried out.
The Baker's Oven requires little maintenance, however the flue and oven base should be
periodically checked by a competent engineer for soot/creosote build up that may require
cleaning. Inside the oven is a removable base plate. This plate should be lifted out and any
soot underneath removed. The hot plates can also be removed for cleaning. The glass on the
firebox and oven doors can be cleaned with steel wool and water. It is not advisable to use a
cleaner that contains caustic chemicals, and abrasive cleaners.
A metal strip at the top of the firebox door can be adjusted in and out with the allen key
provided. The strip should be set leaving a gap of 1mm between the edge of the strip and the
front of the Baker's Oven. This gap provides the secondary air supply.
The fire operates best when there is a certain amount of ash left in the bottom of the firebox.
When removing excess ash, ensure to leave a minimum 10mm thick bed of ash in the bottom
of the firebox.
Hide quick links:
Advertisement
Table of Contents
