Primary Air Setting; Recommended Fuels - EIRECO 740 Designed And Manufactured In Ireland

PRIMARY AIR SETTINGS
The spin valve (2) located at each side of the fire box (1) controls the primary air supply to the
stove. For maximum heat output and burn rate rotate both spin valves (2) fully anti-clockwise
and for a minimum heat output and burn rate rotate only one of the spin valves (2) clockwise
until fully closed. You will soon learn spin valve settings to best suit your requirements.

RECOMMENDED FUELS

Wood briquettes and seasoned. The length of the pieces must be suitable for your EIRECO
Wood Burning Stove. For convenient handling and stoking in your EIRECO Wood Burning Stove,
firewood is best cut into pieces 30 cm/12 inches long.
Do not use fuels with a Petro-coke ingredient.
Note:
Only use seasoned wood with a moisture content of less than 20%! If the wood moisture
content is more than 20%, much of the EIRECO Stove's heating value will be wasted in burning
off the excess moisture.
The stove output levels are assessed on Wood briquettes and seasoned wood of good quality.
Reduced outputs will result when fuels of lower calorific values are used. All fuels should be
stored under cover and kept as dry as possible prior to use.
This stove has obtained CE, BS and EN Standard approval as an 'intermittent' operating
appliance for burning natural wood logs and wood briquettes only as the recommended fuel.
CE, BS and EN Standard approval does not cover the use of other fuels either alone or mixed
with the recommended fuel, nor does it cover instructions for the use of other fuels.
10
EIRECO Wood Burning Stove Installation and Operating Instructions