Table of Contents
Advertisement
TX90 6kVA & 10kVA User's Manual
Replacing Batteries
To be performed by qualified personnel only
1. Unscrew the bottom of the front panel as indicated in Step 1 below.
2. Remove the front panel as indicated in Step 2.
3. Remove the screw of the battery pack fastener as shown in Step 3.
4. Remove the fastener as shown in Step 4.
5. Unplug the hot-swappable battery connectors as shown in Step 5.
Xtreme Power Conversion Corporation
TX90-6K shown above
Uninterruptible Power Supply
Page 28
Advertisement
Table of Contents
