Sanyo LED-22XR10F Service Manual page 19

7 800×600
8 800×600
9 1024×768
10 1024×768
11 1024×768
12 1152×864
13 1280×960
14 1280×1024
15 1280×1024
16 1440×900
17 1680×1050
18 1360×768
5.5 HDMI port
Input HDMI signal from VG849 signal generator with the formats listed in Table 2 and Table 3
respectively, check if the display and the sound (32 kHz, 44.1 kHz, 48 kHz) are normal under the
circumstances of power-on, switching channels or formats, etc.
5.6 USB port
Media playing function
Insert USB memory containing files of picture, audio and video, check if the picture, the sound and
other functions are normal;
5.7 MUSIC port (only for SANYO model)
Input audio signal to side music port from audio output device, check if the sound is normal;
5.8 Other functions checkup
a) Check if timing on/off, sleeping time, picture/sound mode, OSD, stereo, digital audio interface,
etc., are normal;
b) Check if digital RADIO program is normal;
c) Check if the functions of LCN, OTA are normal;
6 User menu setup before shipment
Enter into "LOCK" user menu, select submenu item "Restore Factory Default" and then press key
"OK" to make setup before shipment;
a) Clear out information of all programs;
b) Clear out information of VCHIP, etc.;
c) Recover default analog parameters;；
d) Set menu language as "English";
e) Set power-on mode as "OFF".
48.077
46.875
48.363
56.476
60.023
67.5
60
63.98
80
-
-
47.7
72.188
75
60.004
70.069
75.029
75
60
60.02
75
60
60
60
50
49.5
65
75
78.75
108
108
108
135
-
-
85.5
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
SXGA
-
-
-