Programming Summary For The Answering System - Panasonic KX-TC1743CB Operating Instructions Manual

PQQX13198ZA-BM-2 01.6.14 4:48 PM y [ W 26
" Preparing the Answering System
Programming Summary for the Answering
System
You can program the following functions using the handset near the
base unit. See the page numbers below for details.
The unit must be in the standby mode before programming.
Lift the handset, and press
(›) (‹)
Press or
(›) (‹)
Press or
(›) (‹)
Press or
1Day and time
Remote code
Number of ring
Recording time
When finished setting, press
≥A beep sounds.
≥To return to the standby mode, press (OFF).
≥To cancel during programming, press (OFF). Start again from the beginning.
≥If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
26
(REDIAL/PAUSE/FUNCTION)
to select "Program", and press
to select "TAD program", and press
≥If the handset displays "No link to base Place on
cradle and try again." and an alarm tone sounds,
move closer to the base unit and try again.
to select the desired function, and press
To adjust the day and time (p. 27).
To set the remote code (p. 71).
To select the number of rings (p. 30).
To select the caller's recording time (p. 29).
EDIT (fl)
(Save key).
.
EDIT (fl)
.
EDIT (fl)
.
EDIT (fl)
.