Panasonic KX-TC1743CB Operating Instructions Manual page 40

PQQX13198ZA-BM-3 01.6.14 4:49 PM y [ W 40
" Call Display Service
≥Caller information cannot be displayed in the following cases:
≥—If the caller dialed from an area which does not provide a Call Display service,
the display will show "Unavailable Name & No.".
≥—If a long distance call is identified, and the caller's name and/or number
cannot be received, the display will show "Long distance".
≥—If the caller has requested not to display his/her information, the display will
show "Private caller".
≥If your unit is connected to a PBX which does not support Call Display services,
you cannot access those services.
≥The name display service may not be available in some areas. For further
information, please contact your telephone company.
To check the number of new calls
When new calls have been received, the CALLER ID indicator flashes
slowly on the base unit.
While the handset is on the base unit:
If you have received 10 new calls, the
display will show the following:
10 new callers
While the handset is off the base unit:
The unit must be in the standby mode.
(›) (‹)
Press or
If you have received 10 new calls, the
display will show the following:
10 new callers
4 3
40
to turn the display on.
1=Directory
(›), (‹)
CALLER ID Indicator