Warnings And General Guidelines; Installation - modbar Steam System Operating Manual

O M
PERATING ANUAL
● This machine is for professional use only, and should be installed in locations where its use and
maintenance is restricted to trained personnel. Children are forbidden to operate or play with
the machine.
● The equipment must be installed to comply with the applicable federal, state, or local electrical
and plumbing code. The installation also must comply with the manufacturer's instructions, and
must be performed by qualified and authorized personnel.
● Ensure that the specifications on the equipment name plate correspond to the main electrical
supply to which you will connect the Modbar.
● Safe electrical operation of this device will be achieved only when the connection to the power
outlet has been completed correctly and in observance of all local, national, and international
electrical codes and safety regulations, and particularly by grounding the unit. Make sure
grounding has been done properly as it represents a fundamental safety requirement. Ensure
qualified personnel check such connection.
● Improper use or installation of Modbar equipment can cause product damage and or serious
injury to end user. Modbar will not be held responsible for any damages or injuries occurring if
equipment has been misused, installed improperly, or tampered with.
● When you receive your equipment, thoroughly inspect the packaging and equipment for any
signs of damage. If damage is suspected, please contact Modbar support before attempting to
install or operate the equipment.
● Modbar equipment is not intended for use outdoors or in an unconditioned environment where
freezing temperatures may occur.
● Do not leave machine unattended during brewing processes.
● Do not use wet cloth to clean screens or switches on unit(s) as they are not waterproof.
● Repairs to Modbar equipment should be made only by trained technicians and use only Modbar
approved parts.
● Incorrect installation may cause injury and/or damages to people, animals, or objects, for which
the manufacturer shall not be held responsible.
● We do not recommend using adapters, multiple plugs and/or extension cords. If you cannot
avoid using them, make sure that they are exclusively of the kind which conforms to local,
national, and international electrical codes and safety regulations, being careful not to exceed
the power and current ratings indicated on such adapters and extension cords.
● This device must be used exclusively for the functions which it has been designed and built for.
Any other application is inappropriate and dangerous. The manufacturer shall not be
responsible for any damages caused by improper and/or irrational use.
www.modbar.com Document 003-0042-1.1| Software Version 2.0
S S
TEAM YSTEM
2