Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ONV IPS31108PF
Summary of Contents for ONV IPS31108PF
-
Page 1: User Guide
USER GUIDE PoE & Optical Transmission IPS31108PF Series... -
Page 2: Packing List
Statement Copyright @ 2002-2013 Optical Network Video Technologies (Shenzhen) Co., Ltd All Rights Reserved This document contains proprietary information that is protected by copyright. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of Optical Network Video Technologies (Shenzhen) Co., Ltd. -
Page 3: Product Overview
Its 3KV network port surge protection can adapt to harsh outdoor environment and ensure the reliability of the uninterrupted PoE system. Note The product ‘Switch’ mentioned in the manual, if without a special request, it is referring to industrial IPS31108PF PoE switch, PoE switch in short in below. - Page 4 Technical Structure and Port Description 165 mm D.Reset C.Up-link Gigabit SFP Optical Port E.System Working Status Light A.PoE Power Port B.Up-link Gigabit Optical Multiplexing Port A. PoE Power Port E. System Working Status Light B. Up-link Gigabit Optical Multiplexing Port F.
-
Page 5: Indicator Description
Indicator description: Description Indicator Status Green LED ON Normal Power Indicator: SYS Power OFF Connected PD Device, working properly Green LED ON PoE Indicator: PoE Green LED Blink Short circuit or current overload No Connected PD or Power OFF Data transmission properly Yellow LED Blink Connected with 10Mbps or 100Mbps network device 100M Indicator: Link... -
Page 6: Installation Guide
Installation guide Please install with the supporting devices. Installation Please confirm the following things before installation: 1. If the POE port meets the power requirement of the connecting devices. 2. If the POE standard requirement and power supply matches with the power receiving device (1/2+、3/6-( End -span)/ 4/5+、7/8-(Mid-span)) 3 .If the output power of the matched power adapter is compatible with the specification in the label of the POE switch Please install the POE switch according to the following steps:... -
Page 7: Connection Diagram
Connection Diagram... - Page 8 35mm rail-mounted design. IPS31108PF-at: 8x 10/100M ports +1x 10/100/1000M optical electrical combo port +1x 10/100/1000M SFP optical port PoE switch, 1-8 port supports PoE, IEEE 802.3at, Each PoE port power can be up to 25.5W,the whole power is 240W, network port transmission distance is 100m, the SFP optical module transmission distance is 20-120Km.35mm rail-mounted design.
Need help?
Do you have a question about the IPS31108PF and is the answer not in the manual?
Questions and answers