Tool Option Setting & Inspection Per Countries; Local Dimming Inspection; Ship-Out Mode Check - LG 42LE5400 Service Manual

• Standard color coordinate and temperature using CA-
210(CH 14) – by aging time
1) Edge/IOP LED models
5.2. Tool Option setting & Inspection per
countries
(1) Overview
• Tool option selection is only done for models in Non-USA
North America due to rating
• Applied model: LA02D and LA02E Chassis applied to
CANADA and MEXICO
(2) Country Group selection
• Press ADJ key on the Adj. R/C, and then select Country
Group Menu
• Depending on destination, select KR or US, then on the
lower Country option, select US, CA, MX. Selection is
done using +, - KEY
(3) Tool Option Inspection
• Press Adj. key on the Adj. R/C, and then check Tool
option.
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
5.3. Local dimming inspection (Optional)
5.3.1. Edge LED models with local dimming
(1) Press 'TILT" key of the Adj. R/C and check moving
patterns. The black bar patterns moves from left to right.
If local dimming function does not work, a whole screen
shows full white.
5.3.2. IOP LED models with local dimming
(1) Press 'TILT" key of the Adj. R/C and check moving
patterns. The black cross-bar patterns moves from top-left to
Bottom-right. If local dimming function does not work, a whole
screen shows full white.
5.4. Ship-out mode check (In-stop)
• After final inspection, press In-Stop key of the Adj. R/C and
check that the unit goes to Stand-by mode.
- 15 - LGE Internal Use Only