Description; About The 960L; Unpacking The 960L; The Rear Panel - Lexicon 960L Owner's Manual

960L Owner's Maunal

Description

About the 960L

The 960L system consists of two components: a rack-
mounted Mainframe designed for remote mounting in
machine rooms or elsewhere, and a dedicated
controller, the LARC2.

The Rear Panel

The 960L mainframe's rear panel holds four I/O cards,
together with power connections,
switch, mains voltage selector switch and option plates.
The I/O cards can be removed for service and/or
upgrades without removing the chassis from the rack.
I/O Option plate
Analog in
(balanced XLR)
Analog out AES in
(balanced XLR) (XLR, channel pairs)
the mains power
Wordclock
MIDI (input loop,
(in, out, thru) out)
AES out
(XLR, channel pairs)
Figure 1-1 — 960L Rear Panel

Unpacking the 960L

The 960L system is shipped in two cartons, one
containing the 960L mainframe, the other containing
the LARC 2 dedicated controller. After unpacking, save
all packing materials in case you ever need to ship the
unit. Thoroughly inspect the 960L system and packing
materials for signs of damage. Report any shipment
damage to the carrier at once.
accessories are packed with the 960L Mainframe (for
the LARC2 carton, see Chapter 2):
• Lexicon 960L Mainframe, with cards installed
• IEC power cord
• CD-ROM, 960L Software
• This User Guide
• Warranty and Registration Cards
• CE compliance certificate
• License Agreement
• Bumper feet (4)
The proper ordering (top to bottom) of the cards is I/O
Clock Card, I/O Option Plate, AES I/O Card, Analog In
Card and Analog Out Card. Cards should be kept in
this order.
Remotes
(Connect LARC2
to port 1)
Option plate
The Mainframe
The following
Mains Mains
voltage power
selector switch
IEC power
connector
1-1