Advertisement
We can reduce this transmission time by increasing the baud rate from the receiver
and/or the transmitter. For example, the same frame length with 115200 bps (on both
sides) will only take 42ms.
Those devices may be used in a "Relay" configuration by plugging directly the
Receiver on another Transmitter (through the banana socket or RS232 connection).
Hands on: Reinitialize your devices
If the systems are in a unknown mode, you can Initialise your system in the
OEM configuration (Channel 1, Team A, Buzzer On, Baud Speed
9600bps, Mode Impulse). Push simultaneously SET and TEST BATT for 3
seconds. All LED's will flash and the system will beep until it is reinitialized.
5. Pin Outs
Transmitter (male socket)
1 NC
2 Radio RxD (RS232)
3 Radio TxD (RS232)
4 RS485 Signal B
5 GND
6 NC
7 RS485 Signal A
8 NC
9 NC
Receiver (female socket)
1 NC
2 Radio RxD (RS232)
3 Radio TxD (RS232)
4 RS485 Signal B
5 GND
6 NC
7 RS485 Signal A
8 NC
9 NC
Advertisement
