Advertisement
2. Battery Charging
Each device has a Lithium-Polymer battery with supply 2100 mAh. Those batteries
may be charged with our charger HL540-10 or other 12V charger with a minimum of
800 mA.
For charging the battery we advise you to use our OEM TAG Heuer charger
Using another model may cause some trouble or harm the device.
-
For charging, turn off the system.
-
Connect the charger on the mains
-
Plug the charger into the device
-
The red LED will be on during the charge
IMPORTANT :
Always charge the devices by temperature above 32° F (0° C) and below
86° F (30° C)
The red LED lights during the charging process, when fully charged, the red LED
shuts down and the green LED will light on.
For a fully charged Battery it may take approx. 5 hours (for a completely discharged
battery)
Never connect the terminals of the battery in short-circuit.
To avoid keeping the battery pack fully loaded or completely discharged for a long
period, which reduces the lifespan of the battery. In the case of prolonged non-
utilization of the battery pack, it is necessary keep the system in a dry room, after
a normal discharge
In case of a reduced capacity of the battery pack, even after the load, leave the
system ON a whole night to obtain a complete discharge, then recharge the
battery pack completely.
Renew the battery pack if the problem continues.
Advertisement
