Konica Minolta bizhub 169 Service Manual page 108

Theory of Operation Ver. 1.0 Apr. 2007
A. Operation flow in the 1-sided mode
Original Detection Sensor
Scanning the 1st side
1. When the Start key is pressed, the Paper Feed Motor starts turning backward,
causing the Pick-Up Roller to lower and start a paper take-up sequence.
2. The scanning of the 1st side is started after the lapse of a given period of time after
the Original Detection Sensor has been activated by the leading edge of the origi-
nal.
3. The original is transported for a given period of time after the trailing edge of the
last page of the document has deactivated the Exit/Turnover Sensor. It is then fed
into the Exit Tray and the Transport Motor is deenergized.
Exit
Exit/Turnover Sensor
5. Operation
4344T2C506AA
9