Table of Contents
Advertisement
R u g g e d T a b l e t C o m p u t e r
R T C - 8 4 0
4.2 When to Replace the Battery
Over time, the battery's capacity gradually decreases. We
recommend that you replace your battery when you notice that it
begins to store significantly less charge.
Changing the Battery
Change the main battery pack as follows:
1. Turn off the RTC.
2. To replace the Battery remove the screw and the Battery Bay
Cover shown right
3. Make sure the replacement battery is properly orientated. Then
insert the battery into the battery compartment. Check that the latch
locks back into position.
4.3 Heat Considerations
The RTC processor has been specially designed to consume little
power, and generates very little heat. However, working in a hot
environment, or working for long periods may raise the
temperature.
If the temperature continues to rise, processor activity will be
reduced. You may notice a slight loss of performance when this
happens.
4 - 4
Chapter 4 Power Management and Using Software
Advertisement
Table of Contents
