Quick Start - Aaeon Rugged Tablet Computer RTC-840 Manual

R u g g e d T a b l e t C o m p u t e r

1.4 Quick Start

Turning on the Rugged Tablet Computer for the First Time
1. Connect the AC adapter power cord to the AC adapter.
2. Connect the AC adapter to the DC power port on the bottom side
of your RTC.
3. Connect the AC adapter power cord to an AC outlet.
4.
Press the power button to turn on the power.
Note: The battery is not fully charged. Allow your battery to fully charge
before using it (i.e., before disconnecting AC power). Calibrating the battery
before use is also highly recommended. Refer to Chapter of Power
Management for further information.
R T C - 8 4 0
Chapter 1 Introduction
4
1-5