Specifications - Pro Built GILES 202 Assembly Instructions Manual

Arf kit giles 202 - 35 % - 93” ( 2.36 m )
Table of Contents

Advertisement

Specifications

Wingspan
93 inches ( 2.36 m )
Length
82 inches ( 2.08 m )
Wing Area
1560 sq. inches
Weight
22 – 23 Lbs ( 10.0 – 10.5 Kg )
Recommended Engine size -
60 to 80 cc gasoline – 35 to 60 cc glow engine .
( Not over 6 Lbs or 2.75 Kg weight )
Additional equipment required
Computer Radio with at Least 8 channels
2 Elevator servos minimum 100 oz/in. of torque each.
2 or 4 aileron servos, total torque required not less than 120 oz./in. per wing..
Rudder servo(s) at least 180 oz./in. (see text).
Throttle servo.
Radio operated engine kill switch or servo operated choke strongly suggested .
Single or dual radio battery packs at least 1650 mah total.
Switch[es] for receiver batteries.
Miscellaneous servo extensions..
High strength pushrods, carbon fiber reinforced suggested.
For Gas engine - Gasoline resistant fuel tank and lines with filler system.
3.5 inch wheels for main landing gear, 1.5 inch tail wheel.
3/16 inch axles for main landing gear.
5" spinner – Strongly suggest Tru-Turn alloy for required true - balance .
Heavy duty control horn set (3 or 4 sets required)
Please remember, this is a big airplane with high stresses on the controls. You must use
high performance servos, pushrods, linkages, horns, etc.
Flexing in linkage or loose hinges can and will cause flutter of the control surfaces which
will destroy the airplane in just a few seconds. Metal gear servos are required. Proper
installation of hinges is critical.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents