Advertisement
Available languages
Available languages
Auto power-off setting
‐
The auto power off has a factory default duration of 20 seconds. This is the optimal setting to maintain a low
battery consumption
‐
The auto power off can be configured to 10, 20 and 30 seconds and off (screen remains always on).
‐
To adjust the auto power of duration, press on/off button (
up/down button (▲/▼), highlight "auto power off" and press menu button
select the desired option, and press menu button ( ) to store selection.
‐
Caution: In "Off" mode, the screen will remain on until the on/off button is depressed. If the on/off button is
not depressed, the screen will remain on until the batteries are depleted.
View images/videos stored in memory card
‐
Press on/off button (
screen.
‐
Scroll through photos and videos using up/down buttons (▲/▼). When the image in the screen is a photo, the
photo icon (
video icon (
stop video, press the up button (▲).
‐
While watching a photo or video, press menu button ( ) to go to the delete menu. Here you will be able to
delete the current image or all images stored in memory card.
Language setting
‐
This door viewer can be configured to different languages: Russian, French, Spanish, Portuguese, German
and Mandarin. Press the on/off button (
Press menu button ( ) to enter language menu, and highlight the desired language. Press menu button ( )
to store new language setting.
Door bell tone and volume adjustment
‐
Press the on/off button (
to enter the door bell menu.
‐
To select bell ring volume, highlight "high", "low" or "off" and press the menu button ( ) to store selection.
‐
To change the door bell tone: while in the "Ring" menu, select "Ring set" and press menu button ( ). Using
the up button (▲), navigate through the different tones and press menu button ( ) to store selection.
Other menu options
‐
Frequency: To obtain the highest quality image, it is recommended that the frequency of the door viewer be
configured to the voltage of the region:
For 100 to 120 volts, the recommended frequency setting is 60Hz (USA, Japan, etc.)
For 220 to 240 volts, the recommended frequency setting is 50Hz (Europe, South America, etc.)
‐
Format menu: The memory card can be formatted from the door viewer by selecting this option in the menu.
Caution: the memory card format cannot be reversed; all images and information stored in the memory card
will be deleted.
) and the left button (◄ ) until the photo icon (
) will show up in the upper left part of the screen. When the image in the screen is a video, the
) will show on the upper left part of the screen. To watch the video, press the right (►). To
) and using up/down button (▲/▼), highlight "Ring" menu. Press menu button ( )
). Press menu button (
) and using up/down button (▲/▼), highlight "Language" menu.
) and using the
( ) again. Using up/down
) or video icon (
) shows in the
12
Advertisement
