schwa-medico EMP 2 PRO Instruction Manual page 10

adapts automatically within the range of 148 µs at the lowest frequency and 70 µs at the highest
frequency. Program 8 and program 7 differentiate in the pulse width range.
Symbols on the display during stimulation:
Rising ramp:
See illustration program no. 7
Program 9 and U9
Stimulation type
Frequency
Rising ramp
Therapy duration
Description:
is working time delayed to the other. The intensity increases within 0.5 s from zero to the set level
and decreases within 0.5 s from the set level back to zero. Since both channels work in phase,
channel 1 reaches its maximum intensity level when channel 2 is at its lowest intensity level.
Dynamic stimulation offers a comfortable massage effect and pain relief when electrodes are
placed in the right position in the pain area. Please see the special electrode positioning for
dynamic stimulation in the chapter electrode placement.
Symbols on the display during stimulation:
Rising ramp:
See illustration program no. 1
Program 10 and U10
Frequency
Therapy duration
Description:
channels. It suits best for acute pain (nerve pain as well as joint pain).
Symbol on the display during stimulation:
Program 11 and U11
Frequency
Therapy duration
Description:
the treatment of chronic pain.
Symbol on the display during stimulation:
See illustration program no. 10
Program 12 and U12
Stimulation type
10 EMP2 PRO | Instruction Manual
Falling ramp:
Gate control anti-adaptation
Dynamic stimulation
80 Hz Pulse width
0.5 s Falling ramp
20 min
Both channels are working with the same frequency. Each channel
Falling ramp:
Classic gate control
120 Hz Pulse width
20 min
Program 10 works with the same frequency and pulse width on both
Treatment of contractures
1 Hz Pulse width
20 min
Program 11 suits well for the treatment of contractures as well as for
Atrophy upper extremities
Muscle strengthening
150 µs
0.5 s
150 µs
150 µs