Setting Up The Digital Photo Frame - Pandigital PAN5000W02 User Manual

Setting up the Digital Photo Frame

The Digital Photo Frame is easy to set up. Just follow these steps:
1. Plug the AC Power Adapter into the Digital Photo Frame and into a wall
outlet.
2. Insert a memory card into the card slot.
Secure Digital™ or MultiMedia Card™, MemoryStick™, MemoryStick Pro™, or xD Memory
Card™ (MemoryStick Pro Duo required MemoryStick™ adapter)
Note: The card will only fit in one direction; do not force it. The card should fit
snugly when properly inserted.
3. Slide the POWER button on the left side of the Digital Photo Frame up,
the Digital Photo Frame will power on and automatically
of the photos on the card. Slide the POWER button down to power off.
4. To display photos individually, press EXIT on the remote control to pause
slideshow.
5. Press EXIT again to return to the thumbnail screen. Use the directional
arrows to choose a photo. Press ENTER on the Digital Photo Frame, or
on the remote control. The selected photo is displayed on the Digital
Photo Frame.
Note: Pull the plastic tab sticking out of the remote control. It protects the
battery, and the remote control will not work unless it is removed.
6. To restart the Slideshow, press Enter again, or press Slideshow on the
remote control.
6
start a slideshow