Pandigital PAN5000W02 User Manual page 15

1. In the Select Mode screen, select Photo and press ENTER to display the
thumbnail screen.
2. Select the pictures to add to the folder by pressing the + button. You can
deselect a picture by pressing the – button.
3. After you have finished selecting all the pictures, press SETUP and then
select Assign Selected Photos to option.
4. Choose one of the folders to assign the selected photos to and press
ENTER .
Note: The pictures are assigned (linked) to the folder, not copied. Deleting
the picture from internal memory will also delete the link to the
assigned folder.
5. You can also assign pictures to folders in single picture mode or
slideshow mode by pressing SETUP and then choosing the Assign Photo
To option and pressing ENTER and then selecting the folder to assign the
photo to.
Un-assigning Pictures From Folders
1. From the Select Mode screen, press SETUP and select the View Folder
option and press ENTER .
2. Select the folder you want to un-assign pictures from and press ENTER .
3. Select the pictures to un-assign by pressing the + button. You can
deselect pictures by pressing the – button.
4. After you have finished selecting all the pictures, press SETUP and select
the Remove Photo From This Folder and press ENTER .
5. Choose Selected Photos to only un-assign the pictures you previously
selected, or choose All to un-assign all the pictures in that folder.
6. Press ENTER to confirm your selection.
Note: Un-assigning a picture from a folder will not delete the picture from
Internal memory.
Slideshow Pictures from Folders
There are 2 ways you can start a slideshow of the pictures assigned to each
folder.
15