Disconnect The Digital Photo Frame From The Computer; Frequently Asked Questions - Pandigital PAN5000W02 User Manual

7. To copy photos from your computer to the built-in memory, first locate
the files on your computer, second, select the files you wish to copy,
choose File, Copy, and then move your cursor back to the disk drive in
the open window for the built-in memory.
Note: Most cameras and graphic programs store photos in the Windows
My Pictures folder. If you didn't move them somewhere else, they
are probably there.
8. Click in the window, and choose File> Paste .
9. Similarly, to copy photos from your computer to the memory card, you
copy and paste to the disk drive corresponding to the memory card.
Note: If your PC is connected to Local Area Network drives, or if you
have multiple drive letters already assigned to peripheral devices,
you will need to manage your drive settings in Windows to free up
the four drive letters immediately following your CD-ROM drive so
the Digital Photo Frame can assign them to memory card slots
properly.

Disconnect the Digital Photo Frame from the Computer

It is important not to just unplug or switch off the Digital Photo Frame when
files are being transferred from the memory card or computer to the built-in
memory. It can seriously damage the memory.
1. In Windows XP, left-click on the icon
device.
2. Click OK . A final dialog box opens.
3. Select Close . When the message "It is Now Safe to Disconnect
Hardware" appears, you can disconnect the USB cable from your
computer.
5. You can make as many changes as you wish in the same manner. When
you are finished, press EXIT to close the Setup Menu and return to the
previous screen.

Frequently Asked Questions

Q: How do I set up my Digital Photo Frame?
A: It is very simple to get your Digital Photo Frame out of the box and
running in just a few minutes. Just plug the power adapter into the Digital
Photo Frame and into a standard Wall Socket. Insert a memory card into
20
and select the correct storage