Table of Contents
Advertisement
2. Type "msconfig" in the
configuration utility will appears.
Startup
3. Click the
is unwanted.
Apply
4. Click
>
• Remove programs from the Startup folder. Removing
programs from the Startup folder also helps prevent programs
from running when Windows starts up. To do so, follow the
steps below:
1. Right-click anywhere in the open area on the desktop
New
and select
folder will be used later.
Start
All Programs
2. Click
>
3. Right-click
Startup
4. Right-click any icon in the folder and then select
Properties
. The information about the icon will
appear.
5. You may decide if the program is necessary to be kept
Startup
in the
right-click on them and select
6. Close the open windows to return to the desktop.
7. Open the folder created in Step 1.
Edit
8. Select the
window. The icons that were cut from the
folder are now placed in the folder.
9. Restart the Joybook. The programs removed from the
Startup
folder will no longer run when Windows
starts. However, you can still run them by double-
clicking their icons in the folder created in Step 1.
44
FAQ and troubleshooting
Open
field. The system
tab, and then uncheck any task that
OK
. Restart your Joybook.
Folder
>
. Give the folder a name. This
.
and select Open.
folder. Select unwanted program icons,
Cut
.
Paste
and
commands in the folder
Startup
Recycle Bin
• Empty the
. You can free up disk space by clearing
files you no longer need from the
Recycle Bin
right-click the
Empty Recycle Bin
.
• Delete temporary files and directories. This will increase the
disk space of your hard disk, and reduce the time Windows
takes to access the hard disk. It will also help solve problems
associated with spooling print job.
1. Close all running programs.
2. Click
Start
>
All Programs
System Tools
Disk Cleanup
>
3. Check the types of files you want to delete (temporary
files are safe to delete).
4. Click
OK
.
• Use the Scan Disk and Defragment functions. The Scan
Disk function checks a hard disk for errors, while the Disk
Defragment function takes all the scattered bits of program
data and groups them back together in the front of the drive.
Start
Computer
1. Click
>
2. Right-click the hard disk's icon and select
Tools
3. Click the
tab and then the
4. Check all checkboxes in the dialog that follows.
Start
5. Click
.
6. Restart your Joybook. It may take a long time to
complete.
To run Disk Defragmentation in Windows 7:
1. Close all running software programs.
2. Right-click the hard disk's icon and select
Recycle Bin
. To do so,
icon on the desktop and select
>
Accessories
>
.
.
Properties
Check Now
button.
Properties
.
.
Advertisement
Table of Contents
