Reinstalling Bundled Applications And Drivers; Creating Recovery Discs Or Application And Driver Dvd; Creating A Factory Recovery Cd/Dvd - BenQ Joybook L31 series User Manual

System Restore
2. A
Follow the step-by-step on-screen instructions to complete
system restore.
For more information about System Restore, refer to Start >
Help and Support in Windows 7.

Reinstalling bundled applications and drivers

QDataTrove allows you to reinstall the applications and drivers
that are bundled with the Joybook you purchased.
1. Click the button to select
Drivers .
2. You can perform the following tasks on the main screen that
appears.
• Install drivers.
• Install applications.
• View information about the applications and drivers
that are bundled with your Joybook.
3. Follow the remaining on-screen instructions to complete the
operation.
Creating recovery discs or Application
and Driver DVD
To use this function, your Joybook must come with a CD/DVD
burner. If your model does not come with a CD/DVD burner,
use an external DVD burner instead if you wish to create
discs.
Depending on your purchased model, your Joybook may come
with bundled applications and software programs. If you intend
to use discs to restore your system and reinstall the bundled
36 Recovering your system using QDataTrove
wizard then appears on the screen.
Reinstall Applications and
applications and software programs that came with your
Joybook, insert the recovery discs and the Application and
Drivers DVD created using QDataTrove into the optical drive of
(or connected with) your Joybook, and follow the on-screen
instructions.
QDataTrove allows you to create the following important discs
for your system:
• Recovery discs:
• Factory Recovery CD/DVD
• User Recovery CD/DVD
• Application and Driver DVD
• Bootable USB flash disk

Creating a Factory Recovery CD/DVD

You can use QDataTrove to create a recovery disc that includes
factory default system image, and a disc that includes
applications and drivers that are bundled with your Joybook.
Important:
It is strongly recommended to create Factory Recovery DVD
immediately once your Joybook is ready for use.
1. Click the button to select
CD/DVD
.
2. Select a disc type from the
OK
menu. Click to proceed.
3. Insert a blank disc when prompted to do so, and then click
Yes
.
4. Select your preferred burning speed, and then click
Create Factory Recovery
Disc Category drop-down
OK .