Signing On/Off The Remote Control - Miele DA 3660 Operating Instructions Manual

Signing on/off the remote control

If the connection has been lost between
the remote control and the rangehood,
the remote control and the remote
control function on the rangehood must
be signed on again. To do this, the
remote control function on the
rangehood and the remote control must
first be signed off.
Signing on/off is carried out with the
deflector plate retracted.
 Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
56
Signing on and off must be done at the
same time on the rangehood and the
remote control. Signing on/off mode
has to be accessed on the rangehood
first, then on the remote control.
Accessing signing on/off mode on
the rangehood
 Press the run-on option control
515 for approx. 10 seconds until
the indicator for the power setting 1
lights up.
 Then press in turn,
– the "" control,
– then the "" control,
– then the lighting control .
 Then access the signing on/off mode
on the remote control immediately.
Accessing signing on/off mode on
the remote control
 Press both arrow controls  at the
same time and hold for about 5
seconds until the remote control LED
flashes.
 Press the lighting control .
Signing off
 In signing on/off mode press the ""
control on the rangehood and then
on the remote control.
The remote control LED will flash
steadily.
After approx. 10 seconds the remote
control LED will flash on and off twice
with a longer interval between the
flashes. The remote control has now
been signed off. The LED will go out
after a short while.