Speaker System Hookups
This section describes how to connect the speaker system and how to connect your TV or VCR to the speakers.
Rear speaker (passive)
STEP 2
STEP 1
Front speaker
(right)
The arrow ç indicates signal flow.
STEP 1
Connecting the front speakers
right speaker
R-ch SPEAKER
INPUT
ONLY FOR
SAVA-57
To disconnect, pull the connector out while pressing
the release tab. Never pull the cord itself.
STEP 2
Connecting the rear speakers
Use the supplied speaker cord to connect the left and
right rear speakers.
Infrared transmitter
TV
VCR
left speaker
R-ch SPEAKER
OUTPUT
ONLY FOR
SAVA-57
STEP 1
STEP 3
STEP 4
STEP 5
to wall outlet
1
Twist the speaker cord coating and strip it from
the end of the cords.
2
Insert the stripped wire into speaker terminals.
active
SPEAKER OUT
Be sure to connect matching speaker terminals (e.g. use
the solid wire to connect + to +, and use the striped wire
to connect – to –). If the connections are reversed
(+ to –), the sound will be lack bass.
Getting Started
Rear speaker
(active)
STEP 2
to wall
outlet
STEP 5
Front speaker
(left)
passive
SPEAKER IN
(Continued)
5