Audio Component Hookups - Sony SAVA-57 Operating Instructions Manual

If you have a Sony XBR 2 series TV or Sony Projection
TV equipped with a speaker switch
(For U.S.A. and Canadian customers only)
If your Sony XBR 2 series TV or Projection TV is
compatible with SAVA series speakers, you can use the
TV's menu and remote control functions to operate this
speaker system.
For details, see the operating instructions supplied
with your TV.
Be sure to connect the 1 IN jacks on the front speaker
(left) to the TV's FIXED AUDIO OUTPUT jacks if you
make this connection.
1 Use an optional CONTROL S cord to connect the
CONTROL S TV IN jack on the front speaker (left)
to the CONTROL S OUT jack on the back of the TV.
XBR 2 series TV or
Projection TV
CONTROL
S
OUT
(sold separately)
2 Follow the instructions supplied with your TV to set
it to operate this speaker system.
STEP 5 Connecting the AC power cords
Connect the AC power cords from the front and rear
speakers to wall outlets. The STANDBY indicator on
the front speaker (left) and the infrared receptor on the
active rear speaker light red.

Audio Component Hookups

Since this speaker system incorporates its own internal
amplifier and preamplifier, you can also connect an
audio component, such as a CD player.
Note
Do not connect an amplified audio source. The combined
amplification from the component and the speaker's internal
amplifier may damage the speakers.
Hooking up the Sony HCD-VA550
front speaker (left)
(Optional Compact Disc Deck Receiver)
1 Connect the LINE OUT FIXED jacks on the HCD-
2 Connect the CONTROL S OUT jack on the HCD-
Notes
• You can control the speaker system SAVA-57 using the
• While connecting the HCD-VA550 component to the
See the operating instructions supplied with your
HCD-VA550 for details regarding its operation.
Getting Started
CD
OUT
L
R
VA550 to the 2 IN jacks on the front speaker (left).
Be sure to connect them to the 2 IN jacks.
HCD-VA550
LINE OUT
FIXED
L
R
VA550 component to the CONTROL S HCD IN jack
on the front speaker (left).
HCD-VA550
CONTROL S
OUT
remote supplied with the HCD-VA550. In this case, point
it at the remote sensor g on the speaker.
speaker system with the CONTROL S cord, the auto
power on/off function will not operate.
front speaker (left)
R L
IN
2
OUT
front speaker (left)
R
L
IN
2
OUT
front speaker (left)
7