(Hydrostatic Transmission) - Iseki TM3215 Operation Manual

(Hydrostatic Transmission)

Engine Oil
Use engine oil of the appropriate SAE viscosity. Oil must meet or exceed; MIL-L-2104 C requirements, API Service
"CD".
Capacity (litres).......................................................2.7 ................................... 2.7 ....................................3.1
Recommended Viscosity:
78F (25C) and Above ........................ SAE 30W, 10W - 30 ......... SAE 30W, 10W- 30 ..........SAE 30W, 10W- 30
32-78F (0 -25C) ................................. SAE 20W, 10W - 30 .........SAE 30W, 10W - 30 ........ SAE 30W, 10W - 30
Below 32F (0C) ................................. SAE 10W, 10W - 30 .........SAE 30W, 10W - 30 ........ SAE 30W, 10W - 30
Recommended Change Intervals:
Initial Oil and Filter Change ........................ 50 hours ...........................50 hours .......................... 50 hours
Oil and Filter Change, Thereafter ......... Every 150 hours ...............Every 150 hours .............. Every 150 hours
Engine Coolant
Freezing Protection (Original factory Fill) .......-34°C (-30°F) .................. -34°C (-30°F) ................... -34°C (-30°F)
Recommended Coolant ........................... 50 / 50 mixture ethylene ..... 50 / 50 mixture ethylene ......50 / 50 mixture ethylene
System Capacity (litres)..........................................4.5 ................................... 4.5 ..................................... 5
Fuel Tank
Capacity (litres)....................................................... 28 .....................................28 .................................... 28
Fuel recommended,
Above 4°C (39°F) ......................................... No.2 or No.2-D .................No.2 or No.2-D ................ No.2 or No.2-D
Fuel Recommended,
Below 4°C (39°F) .......................................... No.1 or No.1-D .................No.1 or No.1-D ................ No.1 or No.1-D
Transmission & Differential Housing (Including Hydraulic System)
Capacity (litres)
FHSM (with Mid-mount PTO and
Recommended Lubricant ............................Shell DONAX TD ............. Shell DONAX TD ............. Shell DONAX TD
Recommended Change Interval .................... First 50 hours ...................First 50 hours .................. First 50 hours
Front Axle
Capacity (Common Reservoir) (litres) ....................4.0 ................................... 4.0 ....................................4.0
Recommended Change Lubricant ..................SAE 80 GL-4 ................... SAE 80 GL-4 ................... SAE 80 GL-4
Recommended Change Interval .................. Every 300 hours ..............Every 300 hours .............. Every 300 hours
Grease Fittings
Greaseing Interval (All Fittings) .................... Every 50 hours ................Every 50 hours ............... Every 50 hours
Recommended Grease ............................Lithium base grease No.2 ....... Lithium base grease No.2 ........Lithium base grease No.2
NOTE: Change intervals stated above are for normal usage. Due to adverse operating conditions that may be expe-
rienced (extremely dusty of muddy), change intervals may need to be more frequent.
LUBRICATION & PERIODIC MAINTENANCE
TM3215FH
glycol and water ...............glycol and water .............. glycol and water
18.0 ................................. 18.0 ..................................18.0
or equivalent ................... or equivalent ....................or equivalent
every 200 hours thereafter .......every 200 hours thereafter ...... every 200 hours thereafter
57
TM3245FH TM3265FH