Miele KM 6350 Operating And Installation Instructions page 50

Problem solving guide
Problem
There is a strange
smell or vapours
when a new appliance
is being used.
Power settings 1-9 are
flashing.
LC" appears in the
timer display for a few
seconds after
switching on the
cooking zone.
After switching on the
cooking zone, "dE"
appears in the timer
display for several
seconds.
The cooking zones
won't heat up.
A cooking zone or the
entire appliance
switches off
automatically.
The Booster function
has automatically
deactivated early.
The cooking zone is
not working in the
usual way at the
power setting
selected.
50
Possible cause
There is no pan or an
unsuitable pan on the
cooking zone.
The system lock has been
activated.
The appliance is in
demonstration mode.
A cooking zone has been
operated for too long.
The overheating protection
mechanism has been
activated.
The overheating protection
mechanism has been
activated.
Remedy
The smell and any vapours
will dissipate after a short
time.
Use suitable pans (see
"Pans").
You need to deactivate the
system lock (see "Safety
lock").
You need to deactivate the
demonstration mode (see
"Programming").
This doesn't indicate a
fault. You can continue
operation (see "Safety
switch-off").
See "Overheating
protection".
See "Overheating
protection".