Canon MX470 User Manual page 373

No matter how you use to set the quiet mode, the mode is applied when you perform operations
from the operation panel of the machine or printing and scanning from the computer.
Custom Settings dialog box
When you click Custom Settings, the Custom Settings dialog box is displayed.
If necessary, switch between various modes of machine operation.
Prevent paper abrasion
The printer can increase the gap between the print head and the paper during high-density printing to
prevent paper abrasion.
Check this check box to enable this function.
Align heads manually
Usually, the Print Head Alignment function on the Maintenance tab is set to automatic head
alignment, but you can change it to manual head alignment.
If the printing results are unsatisfactory even after you execute automatic head alignment,
manual head alignment.
Check this check box to perform the manual head alignment.
Prevent paper double-feed
Select this check box only if the machine is feeding multiple sheets of plain paper at the same time.
Important
• Using this function slows down the print speed.
Rotate 90 degrees left when orientation is [Landscape]
On the Page Setup tab, you can change the rotation direction of the Landscape in the Orientation.
To rotate the document 90 degrees to the left when printing, select the check box.
Detect the paper width when printing from computer
When you print from the computer, this function identifies the paper that was loaded into this
machine.
When the paper width detected by the machine differs from the width of the paper specified in Page
Size on the Page Setup tab, a message is displayed.
To use paper width detection when printing from the computer, select the check box.
Important
• If you are using user-defined paper, use the Custom Paper Size to correctly set the size of the
paper loaded in the machine.
If an error message is displayed even though the same size that was set is loaded, clear the
check box.
Ink Drying Wait Time
The machine can pause before printing a subsequent page. Moving the slider to the right increases
the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page dries,
increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.
373
execute