Auto Tuning - JVC LT-32HA60U Operating Instructions Manual

OPERATION
Auto Scan
Channel
Manual Scan
Program Edit
Picture
Common Interface
Audio
Signal Information
Software Update(USB)
Clock
Setup
Lock
MENU
3). Press the ◀▶ buttons to select Antenna Type to
Air that is to say DVB-T.
Antenna Type
Channel
Country
Mode
Picture
Start
Audio
Clock
Setup
Lock
MENU
4). In Country item, press the ◀▶ buttons to select
the country where you will operate the TV.
5). In the Mode item, press the ◀▶ buttons to select
tune mode: ATV / DTV / DTV + ATV. Press the ▼ button
to select Start then press OK button or right button.
6). Channel tuning will commence. This operation may
take a few minutes. The display will show the progress
of the tuning and the number of channels found.
7). If you want to skip the DTV tuning, press the MENU
button to interrupt the tuning half way. You will then go
straight to ATV tuning. You may repeat the above step
if you also want to skip the ATV tuning. An installation
reminder will appear the next time you turn on the TV,
if no channel is found.
8). After tuning is complete, the channels are arranged
in a preset order. If you wish to skip channels, modify
the preset order or rename channels, select
P rogramme Edit under the channel menu.
EN
16
Return Move OK OK
Air
Germany
DTV+ATV
Return Move OK OK
Scanning Ch12
Channel
Digital Channels Found:
Picture
DTV: 3
Radio: 0
Audio
Data: 0
Analog Channels Found: 0
Clock
Setup
Lock
1.2 )Auto Tuning (DVB-C)
1). Press the MENU button and then press the ▼▲
buttons to select the CHANNEL menu and then press
the OK button or right button.
2). Press the▼▲ buttons to select Auto Scan and
then press the OK button, or right button. Under
Antenna Type, select Cable, that is to say DVB-C.
Antenna Type
Channel
Country
Mode
Picture
Start
Audio
Clock
Setup
Lock
Return
MENU
3). Press the ▼ button and then press the ◀▶ buttons
to select the country where you will operate the TV.
4). In the Mode item, press the ◀▶ buttons to select
ATV / DTV / DTV + ATV.
5). Select start to enter the menu as below, to select
search mode, by pressing the OK button or right
button.
Quick
Channel
Full
Advanced
Picture
Audio
Clock
Setup
Lock
Return
MENU
6). Channel tuning will commence. This operation
may take a few minutes. The display will show the
progress of the tuning and the number of channels
found.
Skip Exit
EXIT
MENU
Cable
Germany
DTV+ATV
Move OK OK
▶
Move OK OK