Dtv Manual Tuning; Atv Manual Tuning - JVC LT-32HA60U Operating Instructions Manual

OPERATION
7). If you want to skip the DTV tuning, press the
MENU button to interrupt the tuning half way. You will
then go straight to ATV tuning. You may repeat the
above step if you also want to skip the ATV tuning. An
installation reminder will appear the next time you turn
on the TV,if no channel is found.
8). After tuning is complete, the channels are arranged
in a preset order. If you wish to skip channels, modify
the preset order or rename channels, select
P rogramme Edit under the channel menu.
Note
All the channels including ATV, DTV and Radio can
be tuned in one go, if the Tune Type is DTV+ATV .
All the old channels will disappear after auto tuning .
After auto tuning , the channel will skip to the first
DTV channel.
2. 1 )DTV Manual Tuning (DVB-T)
1). Press the MENU button and then press the▼▲
buttons to select the CHANNEL menu and then
press the OK button or right button..
2). Press the▼▲ buttons to select Manual
Scan and then press the OK button, or right button.
If you have selected Air in Auto Scan, you will enter
DVB-T manual scan menu.
Digital Scan
Channel
Start
Strength
Picture
Audio
Clock
Setup
Lock
Return
MENU
3). The DTV Manual Scan screen will pop up.
Press the ◀▶ buttons to select the desired UHF
channel or press the OK button then input channel
number. Select Start to commence searching for this
channel. When the signal has been tuned, the picture
and signal strength will be displayed on the screen.
4). Press the MENU button to return back to the
main menu.
5). Press the EXIT button to exit the menu.
2. 2 )DTV Manual Tuning (DVB-C)
1). Press the MENU button and then press the
buttons to select the CHANNEL menu and then
press the OK button or the right button. If you have
selected Cable in Auto scan, you will enter DVBC
manual scan menu.
2). The DVB-C Manual Scan screen will pop up.
Press the▼▲buttons to select(Frequency/Symbol/
QAM Type ),press OK to input Frequency and symbol,
press ◀▶ to change QAM type, then select Start to
start searching for this channel by pressing the OK
button or right button. When the signal has been tuned,
the picture and signal strength will be displayed on the
screen.
3). Press the MENU button to return back to the
main menu.
4). Press the EXIT button to exit the menu.
Ch5
54
Move OK OK
1. Press red button to store the channels after
manual tuning .
2. If the number to be saved is the same as the
number of a current channel, when you press the Red
button, the new number will overwrite the current
channel number.
▼▲
Frequency
Channel
Symbol Rate
Modulation
Picture
Start
Audio
Clock
Setup
Lock
Return
MENU

3) ATV Manual tuning :

You can change the sound system, search for the analog
TV channels and fine tune the channels , then store the
channels you selected.
ATV Manual Tuning
Save to 1
System BG
Current CH1
Search
Fine tune
Frequency 44.25 MHz
Save
Note
4). Programme edit:
Press the ▲or▼ Buttons to select Program Edit in the
Channel Menu. Then press the OK button or right button
to enter the sub-Menu. Then you will need to select the
program you wish to edit.
474000K
6875K
Auto
Move OK OK
EN
17