Musical Fidelity M8 PRE User Manual

Musical Fidelity M8 PRE User Manual

Preamplifier

Advertisement

Instructions for use
Thank you for purchasing the Musical Fidelity M8 Preamplifier fully balanced dual mono pre-amplifier.
This preamplifier is designed with high quality control and especially balanced sources in mind.
Two balanced (XLR) inputs take care of balanced audio for the best in signal to noise, transient reproduction
and dynamic range from balanced sources. Inside, the balanced signal path is fully maintained, from input to
output, with a specially developed dual mono fully balanced preamplifier circuit.
The balanced volume control is a quad laser-trimmed attenuator giving 0.5dB steps of perfect matching,
allowing precise stereo imaging and ultra-low noise and distortion. The outputs are also balanced allowing
connection of balanced input power amplifiers to realise a completely balanced system from source to
speakers.
Units with single – ended (RCA) inputs and outputs are catered for with 6 selectable RCA inputs, and two sets
of outputs, one fixed for recording, etc, the other is the main controlled output.
The M8 Preamplifier has been designed to mix-and-match input/output signal types and use the unit as a single
ended to balanced (or vice versa) converting preamplifier. It is also designed to allow use of both balanced and
single ended outputs, simultaneously, if required.
All conversions are carried out automatically within the unit, all that needs to be done is choose and connect
the correct input and output leads.
The M8 Preamplifier is designed to be partnered with present and future M8 or M6 series products or
alternatively, may be used with any other high quality hi-fi components. This combination yields one of the best
high-fidelity systems available at any price.
Used properly and carefully, it should give many years of outstanding musical reproduction.
Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they may
harm the surface finish.
If there are any questions about the audio system, please consult the dealer who is there to help and advise.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M8 PRE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Musical Fidelity M8 PRE

  • Page 1 Instructions for use Thank you for purchasing the Musical Fidelity M8 Preamplifier fully balanced dual mono pre-amplifier. This preamplifier is designed with high quality control and especially balanced sources in mind. Two balanced (XLR) inputs take care of balanced audio for the best in signal to noise, transient reproduction and dynamic range from balanced sources.
  • Page 2 CONTENTS Section Page Safety Information – Mains plug (UK only) – Modification warning General advice – Installation precautions & user information Disposal information – EU disposal information – Introduction, cleaning, installation, power connections, audio Installation connections Facilities and connections – Illustrations, main unit front &...
  • Page 3: Safety Information

    • If connecting to a BS1363 plug, a 13 amp fuse must be used. WARNING: MODIFICATIONS THIS PRODUCT EXPRESSLY APPROVED BY MUSICAL FIDELITY WHO IS THE PARTY RESPONSIBLE STANDARDS COMPLIANCE COULD VOID USER'S AUTHORITY TO OPERATE THIS EQUIPMENT. Issue 2...
  • Page 4: General Advice

    GENERAL ADVICE Installation precautions & user information This new M8 Preamplifier is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions: • Heed all warnings shown on the back of the product. •...
  • Page 5: Item Disposal Information

    ITEM DISPOSAL INFORMATION DISPOSAL The crossed out wheeled bin label that appears on the back panel of the product indicates that the product must not be disposed of as normal household waste. To prevent possible harm to the environment please separate the product from other waste to ensure that it can be recycled in an environmentally safe manner.
  • Page 6 Please note: Musical Fidelity currently do not make any interconnecting cables, nor do we endorse any particular manufacturer’s cables. If required, please refer to the Musical Fidelity dealer who can give up to date advice on good quality cables for any particular setup.
  • Page 7 FACILITIES & CONNECTIONS VOLUME control PHONO, CD, TUNER, AUX/HT, TAPE BALANCED 1/HT, BALANCED 2 input selector VOLUME display (in decibels) buttons ON/OFF Button IR RECEIVER lens TAPE MONITOR button PHONO CD, TUNER, AUX/HT RCA left and 12 PHONO MM/MC switch right inputs 13 GROUND post for turntable XLR BALANCED 1/HT &...
  • Page 8: Remote Control Handset

    REMOTE CONTROL HANDSET The universal remote control shown below enables functions from this and related units to be operated from a convenient distance. Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other functions are only available by remote control.
  • Page 9: Phono Input

    OPERATION Starting Once all connections are made, switch on the unit, using the POWER button front of the unit. The MUTE LED will light. Outputs are muted for about 6 seconds, so no sound will be heard. Once the 6 seconds is up the MUTE LED goes out, indicating unit is settled, and ready for use.
  • Page 10 OPERATION TAPE input To use the TAPE input, connect external source to the TAPE input (see page 7). Select TAPE input by pressing the TAPE button so TAPE LED is lit. Selecting the TAPE input can also be achieved by pressing the corresponding button on the remote handset (see page 8).
  • Page 11 If none of these actions affect a cure, please contact the dealer, or an authorised Musical Fidelity service agent. Remember; never open the case of the M8 Preamplifier, as this will invalidate the guarantee. Issue 2 Page 11 of 13...
  • Page 12: Specifications

    IEC type mains lead (10-Amp type) M8 Preamplifier remote control Batteries, LR03 or AAA, manganese alkaline type - 2 off Musical Fidelity reserves the right to make improvements which may result in specification or feature changes without notice. Issue 2...
  • Page 13 MANUAL HISTORY RELEASE DATE CHANGES Issue 1 21st February 2012 issue Issue 2 April 2012 Weights and remote updated Issue 2 Page 13 of 13...

Table of Contents