Table of Contents
Advertisement
TCP/IP Installation
1. Navigate to the Network Properties screen. This can be done by either:
=
Selecting Start-Settings-Control Panel-Network
=
Selecting the Network Neighborhood icon on the desktop, and right-clicking to
select Properties.
2. The "Configuration" tab of the Network Properties screen will appear. An
example screen is shown below.
3. If a line like the one highlighted ("TCP/IP -> NIC") is not listed, select Add-
Protocol-Microsoft-TCP/IP-OK to add it.
4. Select Properties for the "TCP/IP -> NIC" entry. You will see a screen like the
following.
Figure 32: Network Properties
C – Windows Peer-to-peer
77
Advertisement
Table of Contents
