Table of Contents
Advertisement
Chapter 2
Setup:
Internet Access
This Chapter explains how to install and configure the Internet
Router for Internet Access.
Overview
Setup involves:
<
Hardware Installation
<
Internet Router configuration
<
PC configuration
Software installation is required only for printer sharing. Refer to Chapter 3 –
Printer Sharing for details.
Hardware Installation
1. Connect Network Cables
For each PC, connect one end of a 10BaseT network cable to the Internet
Router's RJ-45 socket (port1 to 4) and the other end into the RJ45 socket on
the PC. Cable length should not exceed 100 meters (yards).
If connecting the Internet Router to another hub, connect
the "Uplink" port on the Internet Router to a normal port on
the other hub. Note that when the "Uplink" port is in use,
port 4 can NOT be used.
2
15
Advertisement
Table of Contents
