Auto Store Function; Front Panel Controls; Input Selector; Volume - Pro-Ject Audio Systems Receiver Box S Instructions For Use Manual

Auto store function

0
M4
Long press starts,
0
M2
storing. keeps stations with good signal strength in the memory and overwrites stations with insufficient
signal level while storing.

Front panel controls

Receiver Box S
To switch on from standby or to standby
The push button on the left hand side will toggle the receiver between its fully operational status and standby.
The blue LED above the stand-by push button shows that the unit is switched on.
In standby the display will show STANDBY.
While switching off, the unit saves the settings for input, volume and mute, to be set automatically after next
power on.

Input selector

After the unit is powered on, the push button
display will show the volume level and the selected input: TUNER, IN1 or IN2.
The optional input expander Pro-Ject Switch Box S provides three more inputs. For further details please see the
user guide of the Pro-Ject Switch Box S.

Volume

and adjust the volume (95 steps) to the desired level. The display will show the volume level set.
-95dB indicates min., 00dB max..

Mute

While the unit is powered on,

Dimming the display

_
0
VOL
After pressing or
Available settings: DIM MIN, DIM 1 - DIM 4 and DIM MAX. The display will show the selected setting.
4
© Audio Trade GmbH · Pro-Ject Receiver Box S · Revision 2012.9.1
0
M 1
confirms the auto store function.
selects the inputs IN1, IN2 and the tuner mode in turn. The
0
ON/OFF
activates and deactivates mute
0
+
VOL
on the remote control,
0
M 1
clears the complete memory while
.
TUNE TUNE
or set the brightness of the display.