Pro-Ject Audio Systems Remote Box S Instruction Manual
Hide thumbs
Also See for Remote Box S:
- Instructions for use manual (6 pages) ,
- Instructions for use (4 pages) ,
- Instructions for use (4 pages)
Related Manuals for Pro-Ject Audio Systems Remote Box S
Summary of Contents for Pro-Ject Audio Systems Remote Box S
- Page 1 InSTRucTIon mAnuAl Pro-Ject Remote Box S © Audio Trade GmbH · Pro-Ject Remote Box S · Version June 15th, 2013...
-
Page 3: Table Of Contents
Programming of remote commands ............10 Settings menu..................11 list of command windows ..............11 Sorting the control windows ..............11 General Settings ................12 Specifications ..............12 Service ................12 Warranty ...............12 Copyright ..............12 © Audio Trade GmbH · Pro-Ject Remote Box S · Version June 15th, 2013... -
Page 4: Connections
Important notice With the Remote Box S and the free Pro-Ject Box control app you are able to control all Pro-Ject units with a infrared remote control via WlAn. The Box control app is available for ioS units, e.g. the Apple iPhone, as well as for smartphones and tablets with the Android operating system. -
Page 5: Front Panel
In case the room is very big or its walls have a low reflection, it’s possible that the IR signal is not strong enough and the controlled units are not able to receive it. Please place the Remote Box S in this case with the front plate facing to the direction of the hi-fi system or use an external IR transmitter (available as accessory) which can be placed invisibly and facing to the hi-fi devices. -
Page 6: Start Of The Configuration
Box S from mains or the computer during this time. The storing process is finished, when the light that shines through the A and B connectors on the back of the units changes from red to green. Your Remote Box S is now registered in your WlAn and ready for use. -
Page 7: Operation Of The Remote Box S With The App „Box Control
Apple- or Android devices to the same wireless network as the Remote Box is necessary. Attention: The app can’t be used, if the Remote Box S wasn’t configured before as described above! Initial start of the app At the first start of the app, the setup wizard comes up automatically. - Page 8 You can skip the next two pages „Select your media library“ (left picture) and „Select your media Player“ (right picture) by tapping on “skip”. They refer to the configuration of Pro-Ject Stream Box devices only. Selection of the devices to be controlled In the next window, „Select your Remote controls“...
-
Page 9: Getting Started With The App
(right picture). This function allows for re-programming of already stored commands and the programming of new ones. See below for a description how to program commands. © Audio Trade GmbH · Pro-Ject Remote Box S · Version June 15th, 2013... -
Page 10: Programming Of Remote Commands
(right picture) asks you to press the respective key on the original remote controller. Aim the controller at the Remote Box S during this. As soon as the command is recognized by the Remote Box S, the insert disappears and the desired command is successfully programmed to the selected control item. -
Page 11: Settings Menu
(right window). Release it at the desired position. Finally, tap on „Done“ to leave the sorting mode. © Audio Trade GmbH · Pro-Ject Remote Box S · Version June 15th, 2013... -
Page 12: General Settings
Driver FTDIuSBSerialDriver_v2_2_16.dmg and ProJect.WlAnconfig.jar A wireless network (WlAn) is necessary for the operation of the Remote Box S. For the configuration program, Java has to be installed on the respective computer (preferable the newest version, please activate the automatic update function in Java).
Need help?
Do you have a question about the Remote Box S and is the answer not in the manual?
Questions and answers