Step 4: Acquire Satellite Signals; Step 5: Ride Your Bike With Rider 210; Reset Rider 210 - Bryton Rider 210 User Manual

Step 4: Acquire Satellite Signals

Once the Rider 210 is turned on, it will automatically search for satellite signals. It may take
30 to 60 seconds to acquire signals. Please make sure you acquire the satellite signal for the
first time use.
The GPS signal icon (
• If the GPS signal is not fixed, an
• Please avoid the obstructed environments since they might affect the GPS reception.
Tunnels Inside rooms,
building, or
underground

Step 5: Ride Your Bike with Rider 210

• Free ride:
Select Meter from the menu list and start free ride.
• Start an exercise and record your data:
In meter view, press
• Start a training:
Select Train from the menu list. Training can be based on time, distance, calories burn, or
the saved workouts.

Reset Rider 210

To reset the Rider 210, long press all three keys (
/ ) appears when GPS is fixed.
icon appears on the screen.
Under water
to start recording, press
High-voltage Construction
wires or sites and heavy
television traffic
towers
to pause, press
/ / ) at the same time.
again to stop.
Getting Started 7