Settings; My Lap - Bryton Rider 210 User Manual

With the Settings feature, you can customize altitude, display settings, sensor settings,
system settings, bike and user profiles, GPS setup, and view device information.
1. In the main screen, press
2. Press to enter the Settings menu.

My Lap

With My Lap feature, you can use your device to automatically mark the lap at a specific
location or after you have traveled a specific distance.
Lap by Location
By Location
Use current
location as
lap location?
NOTE: If the GPS signal is not fixed, a "No GPS signal. Searching GPS, please wait" message
appears on the screen. Check if the GPS is on and make sure you step outside to acquire
the signal.
14

Settings

Settings
My Lap
Altitude
Display
Sensors
to select Settings.
Yes
Settings
1. In the Settings menu, press
My Lap > By Location and press
2. Press to select Detail info and press
to change the setting.
3. A "Use current location as lap location?"
message appears on the screen. To save
the data, press
press
4. Press to exit this menu.
to select Yes and
to confirm.
to select
.