Connect External Devices; Basic Operation; Turn Tv Set On/Off; Select Channel - AEG CTV 2204 Instruction Manual

ENGLISH
70

5. Connect External Devices

Your TV set features a variety of connectors for different devices (e.g. DVD recorder, PC, camera and set top box).
IMPORTANT! Ensure that your TV set and all devices to be connected are turned off before connection. Observe the user
manuals of devices to be connected.
SCART Connector
The SCART connector at the rear transmits analogue image and sound signals in good quality. Connect here devices such
as VCR, satellite receiver, game console or Pay-TV decoder.
• Connect the device via full-featured SCART cable to the SCART connector.
• In the source menu (press SOURCE button) select SCART.
VIDEO Connectors
Connect for instance a video camera via RCA connectors LIN, RIN and VIDEO.
• Connect the device via RCA cable to VIDEO, LIN and RIN connectors.
IMPORTANT! Observe the colour coding of the cables when using AV cable (video = yellow, audio L = white and audio R = red).
• In the source menu (press SOURCE button) select AV.
PC Connector
• Use a VGA cable to connect the monitor connector of the PC with the VGA connector on the TV set.
• Use an audio cable to connect the audio connector of the PC with PC AUDIO IN on the TV set.
• In the source menu (press SOURCE button) select PC.
Component Connector
The component connector Y Pb Pr transmits analogue image signals of external devices, e.g. AV receiver or DVD recorder
in very good quality.
• Use a component cable (purchase separately at your dealer) with 3 RCA connectors to connect component output of
the external device with the inputs Y Pb Pr on the TV set.
• Use an audio cable to connect the audio output of the external device with the audio connectors LIN and RIN on the
TV set.
• In the source menu (press SOURCE button) select COMPONENT.
HDMI Connector
The HDMI connector transmits digital image and sound signals of external devices in very good quality.
• Use an HDMI cable (purchase separately at your dealer) to connect the HDMI connector of the external device with
the HDMI connector on your TV set.
• In the source menu (press SOURCE button) select HDMI.

6. Basic Operation

All settings can be performed comfortably with the remote control and the OSD menu. The basic functions can also be
performed with the buttons on the TV set. In this user manual we generally describe operation with remote control.

6.1 Turn TV Set On/Off

• In standby mode (status indicator red) press the POWER
selected mode and selected source. The status indicator turns blue and the TV set turns on.
• Perss the POWER button on the remote control to turn the device off again (standby mode).
NOTE:
Disconnect from mains power supply if not used, as the device uses a small amount of power in standby mode.

6.2 Select Channel

• Press the CH / buttons or numeric buttons 0-9 to select the desired channel.
• Press the button on the remote control to return to the previous channel.
button on the remote control. It starts in the previously