Setting and canceling the functions
n
To switch between setting and canceling, follow the procedure
below:
Vehicles with smart key system: Close all the doors and turn
the "ENGINE START STOP" switch to IGNITION ON mode.
(Perform
Vehicles without smart key system: Close all the doors and
turn the engine switch to the "ON" position. (Perform
within 10 seconds.)
AVALON_U (OM41428U)
1-2. Opening, closing and locking the doors and trunk
within 10 seconds.)
Shift the shift lever to "P" or "N",
press and hold the driver's door
lock switch (
seconds then release.
The shift lever and switch posi-
tions
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
I n f o r ma t i o n P r o v i d e d b y :
or
) for about 5
corresponding
to
1
the
47